|Date Opened||7/13/2018 3:40:00 PM|
|Salary||$50,326 - $64,892/year|
|Job Type||Open to the Public|
|Close Date||8/9/2018 11:59:00 PM|
The Department of Energy and Environmental Protection (DEEP) is dedicated to conserving, improving and protecting our natural resources and the environment and increasing the availability of cheaper, cleaner, and more reliable energy.
DEEP has a current job opportunity for a Quality Craft Worker (Automotive And Mechanical Equipment) position located in Thomaston, CT. This position is necessary to ensure that the proper inspection, maintenance and repairs are performed on DEEP equipment. This includes specialized Law Enforcement vehicles and equipment, Haz-Mat Division vehicles, Emergency Response Equipment, and Radiation Unit Emergency Generator trailer and units. Other safety issues that this position will address are the routine maintenance, inspection and repair of approximately 800 pieces of equipment and of 361 vehicles including many commercial-sized trucks and trailers that travel on public roads throughout the entire state. This position is housed in a facility that provides inspections and repairs for the following Bureaus: Material Management and Compliance Assurance, Natural Resources, Air Management, Outdoor Recreation, and Central Services vehicles that meet the requirement to maintain the Federal standards.
This is a full time position (37.5 hours per week), Mon - Fri, 7:00am to 3:00pm.
Applicants must upload a cover letter with their applications.
Applicants must include a resume within the "Resume Tab" of their application.
(Note: In order to upload documents you must ensure that your internet browser's 'pop-up' blocker is off. Failure to do so may prevent you from being able to upload documentation and submit your application.) Questions about these required documents should be directed to the hiring agency's human resources office: Angella Levy, email@example.com, (860) 424-3159.
Performs highly skilled maintenance and/or construction work requiring application of trade skills, codes and standard trade practices in electrical, plumbing, utilities, or HVACR trade areas; makes estimates of time, personnel and determines and obtains required materials; keeps necessary records; may perform duties related to similar trade areas as required; may act as liaison with other operating units and outside contacts; may operate heavy equipment; may respond to fire and/or crash emergency situations at state owned airports; performs related duties as required.
AUTOMOTIVE AND MECHANICAL EQUIPMENT: Diagnoses failure in all types of automotive and heavy mobile equipment; services, dismantles, overhauls and reassembles front ends, engines, standard and automatic transmissions, rear ends, hydraulic systems and automotive electrical systems; constructs and repairs any needed parts; welds or brazes parts by oxyacetylene torch or electric welding; may operate testing equipment required to diagnose automotive electronic components.
ELECTRICAL: Performs highly skilled tasks in accordance with national and local codes and standard trade practices; lays out and installs electrical conduit for power and lighting; makes repairs to electrical motors, controllers, switchboard panels, traffic lights, lights, power circuits, ventilating fans, electronic counting and traffic control devices, intercommunication systems and electrical generators; installs open and concealed wiring and lighting fixtures; maintains and repairs unit heaters, fans, building maintenance machines and equipment, gas pumps, refrigeration units, diesel electric generators, movable bridges, fire alarm systems, etc.; repairs relays and switches; rewires motors; bends pipes; installs, repairs and maintains oil burners; performs necessary safety testing of electrical equipment and keeps required records; performs pole work; may diagnose failures and repair drilling and patching to facilitate installations; may assist in high voltage work.
HVACR: Performs highly skilled tasks in accordance with standard trade practices and codes on air systems used in heating, ventilating and refrigeration; operates, maintains, repairs, installs, modifies and assembles air conditioning and refrigeration equipment and systems which may use Freon or chilled water for air cooling means and air or water for condenser means; determines required cooling capacity of units needed for small areas; uses and interprets a psychometric chart; controls and measures air flow, room air changes and room pressurizing; monitors computerized control systems; performs minor tests for fuel specific gravity and gas leaks; adds water treatment chemicals to boilers; may install, modify, repair and assemble electrical or pneumatic controls for this type of equipment; may inspect and repair steam traps fed by main system at various locations; may remove pipe insulation materials associated with repair of pipes and fittings using OSHA approved methods.
LOCKSMITH: Maintains, repairs and installs locking, mechanical and electronic door closing equipment; makes new or duplicate keys and changes lock combinations using hand tools and special equipment; disassembles locks and repairs or replaces worn tumblers, springs and other parts; rebuilds cylinders; sets up and maintains key control and issuing system.
PLUMBING AND STEAMFITTING: Performs highly skilled plumbing and steamfitting tasks in accordance with standard trade practices; assembles, installs and repairs air, gas, water, steam and sewer disposal systems; cuts, bends, reams and threads pipes; caulks and tests joints; installs and repairs gas, water, steam and sanitary fixtures; covers and insulates tanks, pipes and related objects; works with high pressure hot water and steam systems; performs minor tests for fuel specific gravity and gas leaks; adds water treatment chemicals to boilers; may braze pipes; may inspect and repair steam traps and/or vaults fed by main system at various locations; may remove pipe insulation materials associated with the repair of pipes and fittings using OSHA approved methods; may inspect and repair medical gas systems.
UNIVERSITY OF CONNECTICUT, Storrs:
UTILITIES : Performs highly skilled tasks in accordance with standard trade practices and codes on water mains, sewer lines, manholes, catch basins, high pressure steam distribution, chilled water distribution and storm water systems; disassembles, cleans, overhauls and rebuilds motors, valves, pumps, filters and other pumping station equipment; cuts, shapes, drills and welds flat or metal pipe to fabricate for use in water and steam distribution systems; inspects and repairs steam traps and/or vaults fed by main system at various locations; operates heavy equipment such as excavators, dump trucks, backhoes, pipe saws, chain saws, jackhammers and various hand tools; cleans sewer lift station wet wells of grease and debris as needed; digs trenches, constructs trench boxes and removes pipe insulation materials associated with the repair of pipes and fittings using OSHA approved methods.
AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER
The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities.
The State of Connecticut is an Affirmative Action/Equal Opportunity Employer and strongly encourages the application of women, minorities and persons with disabilities.