STATE OF CONNECTICUT EXECUTIVE BRANCH JOBS

Transportation Maintainer 4 (Carpenter/Mason)

Recruitment #210226-2348TC-002

Introduction

The State of Connecticut Department of Transportation (DOT) invites qualified agency employees to apply for the position of Transportation Maintainer 4 (Carpenter/Mason) opportunity located at the Franklin Bridge Maintenance Facility. The purpose of this position within the Department of Transportation is to maintain and repair the Department of Transportation's bridge's within District 2 area.  

About the Role:  

  • Full-time, 37.5 hours/week position
  • Monday-Friday 8:00 a.m. - 4:00 p.m.  

Job Requirements:  

  • Candidates must indicate that they hold a current and valid Commercial Driver's License (CDL) with tank endorsement in the "Licenses and Professional Certificates" section of the application. 
  • Incumbents in this class must be willing to accept assignment to emergency duties, including snow and ice removal, whenever his or her services are needed; to include mandatory winter overtime from November 1 through April 30.  
  • Various storm events will require employees to stay at work for the duration of the storm; which at times could be up to a period of several days, to include holidays and weekends.  
  • Incumbents in this class will be required to have a 30-mile residency requirement from the posted job location.  
  • Applicants invited to interview will be required to produce a copy of their current valid Commercial Driver's License (CDL) Class A or B, with "tank endorsement" and valid Medical Examiner's Card (MEC) at the time of interview, or they will be automatically disqualified.  
  • Candidates will be required to bring a copy of their Master Application and their last two service ratings.            
  • The Agency will conduct a practicum for the Transportation Maintainer 4 (Carpenter/Mason) position, to evaluate and determine whether or not applicant(s) have the skills and qualifications to perform the job duties of this position. Practicums shall be conducted pursuant to the Department of Transportation Administrative Guidelines for Conducting Practicums and will be part of the interview process.

Selection Plan

In order to be considered for this job opening, you must be a current State of CT employee of the Department of Transportation, who has permanent state status*, and meet the Minimum Qualifications as listed on the job opening.  You must specify your qualifications on your application.   

*For employees in the classified service, permanent status is obtained after successful completion of a working test period.  For employees in the unclassified service, permanent status is obtained after serving in a position for at least six months (full-time or full-time equivalent).    

Applicants must meet the Minimum Qualifications as listed on the job opening and specify their qualifications on their application.    

Please ensure that your application is complete before submitting it. Applicants will be unable to make revisions once their application is submitted into the JobAps system. Applicants who submit and subsequently withdraw their application will not be able to resubmit for the same posting.    

NOTE: At any point during the recruitment process, applicants may be required to answer additional questions and/or submit additional documentation which supports their qualifications for this position. These documents may include; cover letters, college transcripts, verification of degree completion, proof of licensure, performance appraisals, employment/supervisor references, etc.    

Interviews will be limited to candidates whose experience and training most closely meet the requirements of the position.  The candidate pool resulting from this posting may be used to fill future Transportation Maintainer 4 (Carpenter/Mason) vacancies that occur in the District 2, Franklin Bridge Maintenance Facility in the next twelve (12) months.    

Candidates who are offered and accept a position with the State of Connecticut are bound by the State Code of Ethics for Public Officials and State Employees which is available at www.ct.gov/ethics.    

Due to the large volume of applications received, we are unable to provide confirmation of receipt or status during the recruitment process Updates will be available through your JobAps portal account.    

Applicants invited to interview may be required to submit additional documentation supporting their qualification(s). These documents may include: performance reviews, supervisory references, college transcripts, licensure, etc. at the discretion of the agency.    

This posting may require completion of additional referral questions (RQ’s) which will be sent to you via email after the closing date.  The email notification will include an expiration date by which you must submit (Finish) your responses.  Please regularly check your email for notifications.  Please check your SPAM and or Junk folders, as emails could end up there in error.    

This posting may be used for future vacancies.    

The minimum experience and training requirements must be met by the close date on the job opening, unless otherwise specified.    

Should you have questions pertaining to this recruitment, please contact Julie Barker, at Julie.Barker@ct.gov.

PURPOSE OF JOB CLASS (NATURE OF WORK)

In the Department of Transportation and the Connecticut Airport Authority this class is accountable for performing a variety of highly skilled tasks in the construction, maintenance and repair of State roadways, roadsides, bridges, airports and other departmental facilities; operates and maintains highly complex mechanical equipment; may serve as trainer.

EXAMPLES OF DUTIES

The following is a listing of examples of trucks, equipment, tasks or related duties, the operating, maintaining or performing of which are considered to be the responsibilities and duties of positions in this class:  

TRUCKS:

  • Low bed type trailer tractor
  • Hydraulic platform crane
  • Tractor trailer with tilt trailer or 20 cubic yard dump trailer
  • Center Line Marking Machine (Truck)
  • (10 wheel, GVW of 58,000 pounds and 800 gallon tank)
  • Track-mounted skid steer with various attachments including but not limited to: backhoe, miller, forestry
  • Glycol vacuum scrubber with 8 foot pickup header
  • Payloader with snow pusher
  • Airfield deicing truck with 45 foot spray boom
  • Double Wing Truck (Driver)  

EQUIPMENT:

  • Motor graders
  • Loader/backhoe
  • Loader Mounted Snow Blower (2000 ton per hour and over)
  • Snow Broom
  • Liquid asphalt application/joint sealing machine  

DUTIES:

  • Back Hoe operation
  • Post pounder operator
  • Vactor operator
  • Welding
  • Lead person in boundary stone setting
  • Lead person in test borings
  • Lead Vendor in Place (VIP) inspector
  • Trainer
  • Performing highly skilled tasks in one or more of the following areas or trades: construction, maintenance, mechanical repair, carpentry, masonry, welding, plumbing and painting.
  • Highly skilled tree climbing work
  • Sign erecting requiring complex rigging
  • Center Line Marking Machine (Rear Switch Operator)
  • District Equipment Coordinator/Radio Room operator (lead)
  • District Projects Records Coordinator
  • Multi-Media First Aid Trainer
  • Highway Operations Center System Operator
  • Acting crew leader
  • May supervise a Materials Management Stockroom
  • Wildlife hazard control
  • Radio monitoring and communication
  • Escort vendors, contractors, etc. in secure areas (State owned airports only)  

In addition to other duties, may be required to receive training in, stand by for and respond to fire and/or crash emergency situations at State-owned airports; performs related duties as required.

KNOWLEDGE, SKILL AND ABILITY

Considerable knowledge of the construction, maintenance and repair techniques of roadways, roadsides, bridges or airports; considerable knowledge of the processes and materials used in the construction and maintenance of highway and bridges or airports; interpersonal skills; oral and written communication skills; considerable ability to operate skillfully and make ordinary repairs to highly complex mechanical equipment as listed on the attached addendum; ability to utilize computer software.

MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE

Three (3) years of experience in the construction, maintenance and repair of roadways, roadsides, bridges or airports, in work involving the operation and care of mechanical equipment.

MINIMUM QUALIFICATIONS - SPECIAL EXPERIENCE

One (1) year of the General Experience must have been in the operation of complex equipment or the performance of skilled tasks.
Note: For State Employees this is interpreted at the level of Transportation Maintainer 3.

MINIMUM QUALIFICATIONS - SUBSTITUTIONS ALLOWED

Graduation from a vocational or technical school with a diploma designating completion of the subject requirements in one of the maintenance trades may be substituted for two (2) years of the General Experience.

PREFERRED QUALIFICATIONS

  • Experience in carpentry and masonry.
  • Ability to meet the 30-mile residency requirement of the posted position.
  • Possession of a valid Connecticut Driver’s License (CDL) with a Tank endorsement.
  • Possession of a current Medical Examiner’s Card.

SPECIAL REQUIREMENTS

1. Incumbents in this class may be required by the appointing authority to possess and retain appropriate current licenses, permits and/or certifications.
2. Incumbents in this class must be willing to accept assignment to emergency duties, including snow and ice removal whenever his or her services are needed.

CHARACTER REQUIREMENTS

At State Airports: In addition to the checking of references and of facts stated in the application, a thorough background investigation of each candidate may be made before persons are certified for appointment.

PHYSICAL REQUIREMENTS

1. Incumbents in this class must have adequate physical strength, stamina, physical agility and visual and auditory acuity, and must maintain such physical fitness as to be able to perform the duties.
2. A physical examination may be required.

WORKING CONDITIONS

1. Incumbents in this class are exposed to extremes of weather conditions, to frequent lifting of heavy weights, to highly dangerous road and traffic conditions, including exposure to heights when working on bridges, to poison ivy, insect bites and allergy irritants during summer months, and to loud and potentially dangerous machinery.
2. The appointing authority may require completion of an asbestos removal program consistent with EPA guidelines for operations and maintenance during employment in this class. Incumbents may be required to use protective equipment such as respirators and safety goggles.

Conclusion

AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER

The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women, minorities, and persons with disabilities.